Please enter your email address to receive your personal one-time use unique coupon code - $100 off $1000:
Cut is possibly the most important of the 4Cs. If you ignore it, you can make an enormous mistake. For example, this diamond from James Allen seems like a great find, as it is 6% cheaper than this diamond from James Allen. In reality, the diamond will have no brilliance and is very poor value.
What is a diamond cut?
What is the best diamond cut?
What proportions of the diamond cut are important?
What are the prices for different diamond cuts?
Is there a difference between diamond cut and diamond shape?
The difference between a well cut diamond and a poorly cut diamond is enormous. You can have something like this ridiculously brilliant diamond from James Allen that runs circles around a poor cut like this one from James Allen.
To come away with a beautiful, brilliant diamond, cut quality has to be a priority. Read on to learn all you need to know about the perfect diamond cut.
Diamond Cut is how well a diamond is cut and polished, including how well-proportioned the stone is, its depth and symmetry. Diamond Cut doesn’t refer to the shape of the diamond, such as an Oval or Pear Shape. Cut quality directly impacts the diamond’s beauty and brilliance. A well cut diamond is luminous and reflects white and colored light back to your eyes. A poorly cut diamond is dull instead of brilliant.
Differences in Diamond Cut greatly impact beauty, aesthetic appeal and the value of a diamond. It is the most important of the 4Cs.
GIA diamond cutting grades for Round diamonds range from Excellent to Poor. Diamond cut grade is based on a number of factors including symmetry, polish, brilliance and fire. For the most brilliance and beauty, only consider Round Brilliant diamonds with an Excellent cut. Ensure the symmetry and polish of the diamond are either Excellent or Very Good.
The reality is that 55% of all Round diamonds receive an excellent cut grade from the GIA. About 25-30% of these “excellent” diamonds are not recommended. Our consultants review thousands of Excellent cut diamonds and find bad specs (depth, table, and angles).
That’s why it’s important to look at the diamond cut grade on the GIA certificate, but to also review the diamond closely yourself or ask an expert. You don’t want to end up paying for an Excellent diamond that’s only mediocre.
A professional gemologist at the GIA reviews each diamond under magnification to determine the Cut grade. Here are the GIA diamond cut grades:
|Excellent||Excellent Cut Diamonds provide the highest level of fire and brilliance. Because almost all of the incoming light is reflected through the table, the diamond radiates with magnificent sparkle.|
|Very Good||Very Good Cut Diamonds offer exceptional brilliance and fire. A large majority of the entering light reflects through the diamond’s table. To the naked eye, Very Good diamonds provide similar sparkle to those of Excellent grade.|
|Good||Good Cut Diamonds showcase brilliance and sparkle, with much of the light reflecting through the table to the viewer’s eye. These diamonds provide beauty at a lower price point.|
|Fair||Fair Cut Diamonds offer little brilliance, as light easily exits through the bottom and sides of the diamond. Diamonds of a Fair Cut may be a satisfactory choice for smaller carats and those acting as side stones.|
|Poor||Poor Cut Diamonds yield nearly no sparkle, brilliance or fire. Entering light escapes from the sides and bottom of the diamond.|
The AGS diamond cut grade chart also includes an Ideal grade. Cut quality is graded by the AGS as Ideal, Excellent, Very Good, Good, Fair or Poor. When looking at AGS diamonds, we recommend only considering Ideal cut diamonds for the best quality.
With most of the 4 C’s of diamonds (the others being Clarity, Color and Carat weight), there’s a sweet spot where beauty and value meet up.
To use Diamond Clarity as an example, there is a point (generally around VS1-VS2) where any increase in grade is not going to offer a noticeable increase in beauty. To the naked eye, a VS1 or VS2 diamond will likely appear clean and flawless.
Diamond Cut, however, is different. It’s the one grade you don’t want to compromise on. While middling grades in clarity or color can be concealed, and low-carat diamonds can still have a radiant and beautiful appearance, a low grade in Diamond Cut is likely to result in a diamond that doesn’t dazzle like it is supposed to.
We recommend you restrict your search to only Excellent or Ideal cut grades, as there is no hiding a below-average cut. Even if your budget forces you to sacrifice in other areas, a well-cut diamond should still have the potential to stand out.
As with all areas in which diamonds are graded, the price can rise and fall a lot depending on your choice of cut grade.
Diamond cut prices are based on the precision and quality of the cut—primarily its proportions and symmetry. For example, this diamond from Blue Nile is about as perfect a cut as you can get. The depth, table and all other proportions are as exact as can be. Because of that, you are paying a higher price for the diamond, even compared to a typical excellent cut diamond.
If the facets (the glossy flat surfaces of a diamond) are proportional, for instance, they refract and reflect light back to the eye in tremendous fashion. Diamonds that aren’t as precisely cut have facets and pavilions that do not refract and reflect light as spectacularly.
The amount of light return and brilliance found in an exceptionally cut diamond is worth the extra diamond cut price. Without brilliance and fire, a diamond is less than radiant—no matter the Carat weight or table size.
In other words, a diamond’s Cut is the quality that most significantly impacts its beauty. That’s why the higher diamond cut prices are worth every penny—and it’s better to spend more on Cut than on Color or Clarity.
For example, Brian Gavin offers a Signature collection (otherwise known as Hearts & Arrows) which includes some of the best Cut diamonds on the market. For instance, this diamond from Brian Gavin has tremendous brilliance at an excellent price point. It would be perfect for a 1 carat diamond engagement ring.
If you’re working within a budget, we recommend forgoing a GIA grade in Color and Clarity to ensure you’re selecting an ideal cut diamond.
The most important factor in a diamond’s value and price is its Cut quality. Many elements are involved in Cut quality including its proportions, facets, finishing details and ability to reflect light. The better these characteristics are as a whole, the higher the quality of the diamond, and in return, the higher the price. While Color and Clarity play a role in a diamond’s beauty, Cut is the most critical of the 4Cs.
Here are the main factors that affect the price of a diamond:
A diamond like this one from Blue Nile seems to be cheap if you are going by the color and clarity. But if you look at the proportions, this diamond is horrifically cut. It is incredibly deep and has a massive table. Under perfect lighting, you may see some sparkle. But in real-life scenarios this diamond will be devoid of any brilliance.
Think You’re A Diamond Pro?
Think you’re a Diamond Pro and can save 25%?
Choose the diamond that you like better.
Is it the J color for $4,082 or the G color for $5,500?
To further understand the factors impacting Diamond Cut quality, let’s examine a diamond’s proportions, primarily its table, width and depth. These elements are universally measured and are excellent indicators of a diamond’s cut quality.
Diamond Cut Proportions directly affect a diamond’s ability to reflect light and provide brilliance. Proportions are based on the ratios between size, angle and shape of each diamond facet. Various combinations of these elements impact how the diamond will interact with light, which determines its overall beauty and lasting appeal (as well as its GIA grading).
Diamond table % is determined by dividing the width of the table (top surface area) by the width (diameter) of the diamond. For example, if the table facet is 3.5mm wide, and the diamond is 5mm wide, the table % is 70%.
If the table percentage is too large, light won’t reflect off of the diamond’s crown angles and facets. Vibrant reflections of color won’t be seen as the light will escape from the top of the diamond instead of reaching the eye.
If the table percentage is too low, light will remain trapped inside the diamond and be emitted through other parts of the diamond instead of to the eye.
A diamond’s width is determined by measuring from one end of its girdle (the diameter at its widest point) to the other end of the girdle.
The width is most important when it comes to determining length to width ratio, which signifies how proportionate the diamond is along with its intended shape (i.e. square vs. rectangular).
Length to width ratio is measured by dividing the length of the diamond by the width. For example, if a diamond has a length of 5mm and a width of 3mm, the length to width ratio is 1.67.
Depth % refers to the height of the diamond, from the culet to the top of the table. Depth is measured in millimeters and percentage. By dividing the depth by the width, the depth % is achieved.
As an example, if a diamond is 4mm in depth and 4.5 mm in width, the depth percentage is 88.8%.
In most cases, a lower depth % of two equal carat diamonds will appear larger due to the increased width. On the other hand, a depth % that is too low can create a darker appearance as it will not reflect light as powerfully.
When a Diamond Cut is too shallow, light hits the pavilion at a low angle. The light travels through the diamond and exits through the sides, instead of reflecting through the table and to your eyes.
While shallow cut diamonds may seem large based on their table size (they are also called Spready Diamonds), the escape of light at the bottom significantly reduces the diamond’s brilliance, sparkle and fire.
When a diamond is cut too deep, light hits the pavilion at a sharper angle, causing it to immediately reflect to another pavilion. The light is forced to retract and pass through the bottom of the diamond. As this happens, light is dulled and the diamond becomes less vibrant and radiant.
A Diamond Cut that is too deep also tends to look smaller than those of an ideal cut.
Simply put, a well cut diamond maximizes the light that strikes each pavilion. Instead of escaping through other parts of the diamond, light reflects back through the crown and table. For our readers that are focused on cut, they have had the most success with James Allen’s True Hearts and Blue Nile's Astor Cut diamonds.
When it comes to determining the highest grade possible, GIA uses the term “excellent” while AGS uses the word “ideal.” These cuts are well proportioned with optimal facet angles, allowing the brilliance and fire to pass through the table for all to see.
For these reasons, excellent cuts are more valuable and more luminous. When buyers have a budget, we often advise choosing a smaller, well cut diamond as opposed to a larger carat that is poorly cut to get the most sparkly diamond.
If you’re unsure of an ideal cut for your diamond, speak to an expert to walk you through the process.
The facets of a diamond are the tiny mirrors that reflect light back to your eyes. Facets surround the diamond’s table. There are facets above the girdle and below the girdle. The pavilion (the part of the diamond below the girdle that reaches to the culet) is also made up of facets. A Round Brilliant diamond is cut with 58 facets total.
The size, placement and symmetry of the facets impact how well the diamond refracts and reflects light. A diamond with unproportioned facets, too many facets or not enough facets, can cause a less than ideal diamond.
A diamond’s brilliance is the brightness of the white light reflection. When looking at a diamond face-up under light, it should reflect an abundance of white light. A diamond that’s not symmetrical, is cut too deep or too shallow, for example, looks dull instead of brilliant.
A diamond’s fire is the amount of colored light that reflects off of the table and facets. Diamonds that are well cut not only have brilliance but fire too. When looking at the diamond face-up under light—especially daylight—you should see colored light bouncing off of the diamond. If the diamond doesn’t exhibit colored light reflection, the diamond has a low amount of fire.
Scintillation of a diamond refers to the flashes of sparkle when light moves on the diamond’s table and facets. The scattering of light resembles a sparkle and is caused by the light and dark areas on the diamond’s surface. A diamond with a large amount of scintillation is more desirable. A diamond without much scintillation can appear dull.
The finishing details are the craftsmanship of the diamond and include its permanent treatment and polishing. The polish of a diamond refers to the condition and quality of the facet surfaces. A diamond that is polished well creates a clear mirror for light to reflect off of. A diamond with a poor polish job looks dull because the facets don’t reflect light as vividly.
Because Diamond Cut is an enormous element in determining the beauty and brilliance of any diamond, there are some complexities. Many factors play a role in how a diamond’s cut quality is determined.
The main factors impacting Diamond Cut Quality are:
When you’re looking to see how well cut a diamond is, take note of how its facets and angles reflect light. Specifically, note how bright and sparkly the light return is when placed under a normal lamp.
You’ll want to gauge the diamond’s fire (the rainbow light of reflection) and its brilliance (colorless light and sparkle of the diamond). Be sure to also watch for any dark spots within the piece.
Be sure to review the GIA cut grade on a diamond’s report, which will include ratings of Poor, Good, Very Good or Excellent.
The terms Diamond Cut and Diamond Shape have distinct meanings.
Diamond Shape describes the outline or figure of the diamond. For example, Pear Shaped and Round Brilliant refer to the shape appearance of the diamond.
Cut refers to the facets, symmetry, dimensions and reflective qualities of the diamond. A Heart Shaped Diamond, for instance, may be cut shallow or deep, dull or brilliant. The Heart Shape remains, while the Cut may differ significantly. The finer the cut, the greater the brilliance and fire of the diamond.
When it comes to selecting an ideal diamond, we recommend a quality Diamond Cut over anything else. For GIA Certified Diamonds, we recommend choosing an Excellent cut grade. For AGS Certified Diamonds, choose an Ideal cut. When we search for a diamond, we filter more heavily on Cut. You can see our parameters by looking at this James Allen diamond search.
For Maximum Brilliance: Consider a Brian Gavin Signature cut. Brian is a leading industry expert in the field of cut optimization. His Signature cuts are on par with the famed Hearts on Fire brand—only far cheaper.
For Round Brilliant Cut Diamonds, don’t give any credence to an online vendor’s cut grade. Only focus on the GIA or AGS cut grade on the certificate.
In addition to reviewing a GIA or other grading report, be sure to look at the diamond yourself or have an expert assist you. Most importantly, ensure the diamond is appealing to you and your personal style and desires.
Our primary focus is making sure your diamond search is easy, simple and accurate. We want you to find the highest quality diamond while staying within your budget.
If you’d like assistance with finding and selecting a diamond, we’ll be happy to filter through the cuts and make recommendations for you.
Please enter your email address to receive your personal one-time use unique coupon code - 15% Off:
Before you buy a diamond, get personal buying advice from industry veterans. We'll help you get the best diamond for the money.
DISCLAIMER: We don't use your email for marketing. Period.
We’ve visited and reviewed many diamond retailers, online and offline. In the process, we’ve come across several diamond vendors that consist
Buying a diamond is confusing. On the surface, it seems like nothing makes sense. Take a look at this 2 carat diamond from James Allen and compare it
Here’s what we’ll cover in this article: How much does a 1 carat diamond ring cost?How large is a 1 carat diamond engagement ring?Where should
We are a team of diamond experts who will teach you to identify scams and avoid spending money on features you can't see. Tell us as much information as possible to help us help you (ie, budget, preferences, etc)Why do we do this?
DISCLAIMER: We don't use your email for marketing. Period.