Please enter your email address to receive your personal one-time use unique coupon code - $100 off $1000:
We recommend looking for a diamond with a VS1 to SI2 Clarity grade. A beautiful VS2 or VS1 diamond will look identical to a Flawless graded diamond, assuming all other grades and features are equal (yet will cost significantly less).
If you’re looking at larger diamonds, any blemishes and inclusions become easier to spot and may be visible to the naked eye. For diamonds greater than 2 Carat, you may need to bump up to a VS1 or VVS Clarity grade for an eye-clean diamond. Whatever the Clarity grade, it’s important to review each diamond closely to ensure that it doesn’t contain any blemishes or inclusions that you can see under normal viewing conditions.
For help evaluating diamonds for their Clarity as well as assessing other important features, contact our diamond experts.
How much does a VS2 diamond cost?
Should I focus on VS2 clarity when buying a diamond?
Is it possible to find a VS2 diamond that is not eye-clean?
What is the difference between VS1 and VS2 diamonds?
Where is the best place to buy a VS2 clarity diamond?
In order to understand what a VS2 diamond is, it’s important to know the basics of Diamond Clarity. Clarity is an assessment of the size, number, nature and position of any blemishes or inclusions in the diamond.
Almost all diamonds have some imperfections, as a result of the process with which they are formed. Diamonds are born from the combination of heat and pressure 80-120 miles deep in the Earth’s mantle and formed over billions of years. This inevitably leads to surface blemishes or internal inclusions, and it’s extremely rare for a diamond to emerge in a perfect condition.
VS2 Clarity means Very Slightly Included. Inclusions in VS2 diamonds, like in this 1.23ct I/VS2 Round Brilliant Cut from Blue Nile, are small, and rarely able to be seen by the naked eye. A VS2 grade comes in around the middle of the overall grading scale for Diamond Clarity, but realistically indicates a high-quality diamond that is very close to looking flawless when viewed in normal conditions.
The GIA grades Clarity on the following scale:
A VS2 Diamond is the lower grade of the VS clarity. VS2 inclusions are almost always easily noticed under 10x magnification (a standard jeweler’s loupe). In some cases, the inclusion is in a difficult-to-spot location. Most often, though, the inclusion is large enough that it can be spotted quickly under magnification. VS2 inclusions are rarely noticeable to the naked eye, especially in diamonds less than 2 Carat.
VS2 may be on the high end of the clarity spectrum, but that does not mean you can buy one site unseen. Take a look at this VS2 diamond from Blue Nile. It seems like a phenomenal deal. After all, it is $1,000 cheaper than this diamond with the exact same specs. But if you look at the image, you will see that the first diamond has a garish inclusion in the center of the table while the second diamond looks clear and is obviously worth spending the extra cash on.
While, in many cases, a VS2 clarity grade represents a clear diamond with few noticeable inclusions, it’s not recommended to focus on grades alone when judging a diamond for its Clarity.
We believe your goal should be to find an “eye-clean” diamond for the best price possible (of course factoring in other features, such as Cut quality and Carat weight).
“Eye-clean” means the diamond doesn’t have any inclusions or blemishes that are noticeable to the naked eye. Depending on the size and location of their inclusions, one VS2 diamond may appear eye-clean, while the inclusions on another may be a lot easier to notice.
Ringo is a patented artificial intelligence model we recently developed to help consumers assess if a diamond is eye-clean. Ringo can examine videos of diamonds to decide whether or not it passes as eye-clean, and will also filter for other parameters like cut quality, fluorescence, and whether it matches your desired setting style.
If you want to select a diamond specifically for your personal needs (budget, shape and setting style), check it out here.
The price of a VS2 diamond depends on many factors, such as the Carat weight, Cut quality, Color grade, and the shape of the diamond.
VS2 Clarity falls in a sweet spot with which you can often get very good value for money. Both VS1 and VS2 diamonds generally offer a combination of beauty and value, where it’s possible to find an eye-clean diamond without paying more than you need to.
It’s quite common for people to make the mistake of buying a diamond with a Clarity grade too high to appreciate. Once it passes the threshold for being eye-clean, it’s nearly impossible to tell the difference between diamonds of higher or lower Clarity grades.
Assuming all else is the same, an eye-clean VS2 diamond like this one from James Allen will look identical to a Flawless graded diamond. Despite appearing almost exactly alike, there’s a big difference in price.
To use another example, this 1.00 Carat, H Color, VVS2 Clarity Cushion Cut Diamond from Blue Nile costs $4,317. A similar H Color, 1.01 Carat Diamond with a VS2 grade in Clarity, also from Blue Nile, is $3,682. You’ll pay 17% more for the first diamond, yet both will look identical when set in a ring and viewed without magnification.
In most cases, a VS2 clarity grade will give you a high-quality diamond (at least, as its clarity is concerned). We recommend people to look for diamonds graded either VS1 or VS2, as this is where you tend to be able to find a perfectly fine, eye-clean diamond without paying too much.
Not all VS2 diamonds are necessarily eye-clean, however, so it’s important to inspect them closely to be sure there are no clearly visible inclusions. Also, be aware that inclusions are easier to spot with larger diamonds, and with diamonds of certain shapes, such as Asscher or Emerald Cuts.
In these cases, VS2 may be a little low. But for a regular-sized Round Brilliant Diamond, the majority of the time this clarity grade is more than enough.
Take a look at these VS2 diamonds:
Inclusions can be more visible to the naked eye in diamonds of a higher Carat Weight. The bigger the diamond, the more surface area there is to spot any imperfections.
While VS1 or VS2 is usually more than enough for diamonds up to 2 Carats, the same grade may not be enough for high-carat diamonds. For example, with this 3.11 Diamond with a VS1 Clarity from James Allen, there is a dark inclusion on the diamond’s table that is easy to notice.
Another example, this 3.62 Carat VS2 diamond also from James Allen features blemishes on the surface that can be seen without magnification.
When you’re looking at diamonds above 2 Carat, such as the examples above, be open to looking at higher Clarity grades too. And even though there is always a chance for a VS2 diamond to be eye-clean, you may need to move up to a VS1 or VVS2 Clarity, such as this beautiful 3.50ct VVS2 diamond from James Allen or this 3.15ct VS1 Round Cut.
You still want to focus on picking out a diamond that’s eye-clean, regardless of the grade. It may be possible to find an eye-clean VS2 diamond, like this 4.05 Carat Cushion Cut Diamond from Blue Nile.
Some Diamond Shapes are better or worse than others at showing imperfections. This is important to know, as a VS2 clarity grade may be fine for one shape, but too low for another.
Step cuts, such as Emerald Cuts and Asscher Cuts (and Baguette diamonds) are more likely to show any inclusions. These diamond shapes feature long, straight, parallel facets, and any marks show up quite clearly.
In comparison, brilliant cut diamonds, such as Round, Cushion, Radiant, Oval and Pear Shaped Diamonds, generally hide inclusions well.
In general, you’ll be able to find an eye-clean brilliant cut diamond in the area of VS2, or sometimes even lower. However, for a step cut, such as an Asscher or Emerald diamond, you’ll often need to look higher, like VVS2 Clarity.
This inclusion plot from the GIA report shows a concentration of crystals in the same space.
The image above shows that VS2 Clarity doesn’t always guarantee you’ll get an eye-clean diamond. Certain factors can affect whether or not it appears clear to the naked eye, including Cut quality (imperfections are hidden easier with better light performance), the color of any inclusions, and the shape or nature of the flaws.
As discussed earlier, the shape and size of the diamond also play a large part. While we can easily spot the imperfection in the Emerald Diamond above, it’s possible the same flaw could be hidden in a Round Brilliant, or a smaller Emerald.
As another example of questionable eye-clean status is this 1.14 Carat Princess Cut from James Allen. It’s graded with Very Slightly Included 2 Clarity. With the size and position of these inclusions, there is a big chance that it will be visible to the naked eye.
Princess Cut with dark inclusions under table facet.
Most importantly, no matter the Clarity grade, be sure to review every diamond closely to be sure there are no noticeable imperfections. If you’d like assistance in selecting an eye-clean diamond, please contact our Clarity experts.
The difference between a VS1 and VS2 diamond is extremely slight. It’s difficult for even a diamond expert to tell one from the other, let alone a regular person in normal viewing conditions.
Compare this VS2 Diamond then this VS1 Diamond, and see if you can notice anything that separates them. Without a magnification tool, it’s unlikely you’d be able to tell which is VS1 and which is VS2 Clarity. Even then, you would need proper training in assessing Diamond Clarity to tell for sure.
The definition of a VS1 vs VS2 diamond gives some differences. VS2 Clarity means that, under 10x magnification, inclusions are almost always easily noticeable. A VS1 grade, on the other hand, means that inclusions are only somewhat noticeable.
In essence, the difference is that inclusions in VS2 diamonds are slightly easier to detect using magnification tools. In both cases, however, the inclusions are slight and difficult to see with the naked eye.
Because the difference between VS1 and VS2 is slight, we recommend looking for eye-clean VS2 diamonds with a carat weight of 2 or below. You won’t sacrifice any of the beauty, but you’ll save some of your budget for other important factors like Cut quality. For a higher Carat stone, you may want to consider a VS1 diamond or even a VVS2 diamond to ensure you get one that’s eye-clean.
These diamonds look identical in a ring.
Real Diamond Pros will know how to save almost 20%
So Which is it?
The SI1 clarity at $8,600
or the VS1 color at $10,500
Choose the diamond you like better and see if you are a Pro!
It’s essential to look closely at any diamond in order to evaluate its Clarity, instead of going by the grading report alone. The report can tell you the nature of any inclusions, but the only way to know for sure if a diamond is eye-clean is to inspect it for yourself.
You’ll need to review high-quality images to see if there are any imperfections. We recommend buying diamonds online from James Allen and Blue Nile, who are currently the only vendors we recommend that offer imagery and inspection tools good enough to properly review Diamond Clarity.
With their advanced technology, you may be able to find diamonds like this stunning SI2 from James Allen that saves you almost 20% over a mediocre VS2 like this one from James Allen or 30% over this one from Blue Nile.
In this section, we’ll answer some of the most common questions regarding VS2 clarity diamonds.
A VS2 diamond is a diamond graded “Very Slightly Included 2” on the diamond clarity grading scale. This grade is one step lower than VS1 (Very Slightly Included 1), and one higher than SI1 (Slightly Included 1).
Usually, a VS2 clarity grade represents a high-quality diamond (in terms of the number or scale of inclusions present). Your aim when purchasing a diamond should be to find a stone that is eye-clean, meaning it doesn’t have any imperfections visible to the naked eye, and many VS2 diamonds pass as eye-clean.
To someone with no experience in shopping for diamonds or evaluating the quality of a diamond, it can be quite stressful comparing one diamond from the next.
Our experts are happy to help you in your search for a beautiful, eye-clean VS2 diamond. We have years of experience evaluating diamonds and Diamond Clarity, having helped thousands of readers along their diamond buying journey.
Feel free to contact our experts, and we’ll help you pick out the perfect diamond for your budget.
Please enter your email address to receive your personal one-time use unique coupon code - 15% Off:
Before you buy a diamond, get personal buying advice from industry veterans. We'll help you get the best diamond for the money.
DISCLAIMER: We don't use your email for marketing. Period.
We’ve visited and reviewed many diamond retailers, online and offline. In the process, we’ve come across several diamond vendors that consist
Buying a diamond is confusing. On the surface, it seems like nothing makes sense. Take a look at this 2 carat diamond from James Allen and compare it
Here’s what we’ll cover in this article: How much does a 1 carat diamond ring cost?How large is a 1 carat diamond engagement ring?Where should
We are a team of diamond experts who will teach you to identify scams and avoid spending money on features you can't see. Tell us as much information as possible to help us help you (ie, budget, preferences, etc)Why do we do this?
DISCLAIMER: We don't use your email for marketing. Period.